How To Boot From Usb Windows Xp

This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, andWindows 11.

Creating a bootable USB drive will permit you to install Windows from the USB drive straight.

To be able to install Windows from a USB, you demand have one of the post-obit:

the ISO image of the Windows version
or the original installation disc of the Windows version

If you don't take either, yous tin can instead download an EasyRE ISO prototype that can be made into a bootable USB or CD to restore your PC.

Contents

one Prerequisites
- ane.1 USB Drive
- 1.2 BIOS/UEFI configuration
- 1.3 ISO epitome
ii Create a Windows XP bootable USB
- 2.1 Using Easy USB Creator 2.0
- 2.2 If you have the installation disc (CD)
3 Create a Windows Vista bootable USB
- 3.1 If you lot have the ISO image
  - 3.1.1 Using Piece of cake USB Creator 2.0
  - 3.one.2 Using Windows seven USB/DVD Download Tool
- 3.2 If you have the installation disc (DVD)
iv Create a Windows vii bootable USB
- 4.1 If yous accept the ISO paradigm
  - 4.1.1 Using Easy USB Creator 2.0
  - four.1.ii Using Windows seven USB/DVD Download Tool
- 4.2 If yous have the installation disc (DVD)
v Create a Windows viii / 8.1 bootable USB
- 5.1 If you have the ISO image
  - 5.1.one Using Easy USB Creator two.0
  - five.one.2 Using Windows 7 USB/DVD Download Tool
- 5.2 If y'all have the installation disc (DVD)
6 Create a Windows 10 bootable USB
- 6.ane If you accept the ISO epitome
  - 6.1.1 Using Piece of cake USB Creator ii.0
  - 6.one.ii Using Windows 7 USB/DVD Download Tool
- half-dozen.2 If you have the installation disc (DVD)
7 Troubleshooting
- 7.1 Setup cannot detect the Terminate User Licensing Agreement (EULA)
- 7.2 Download Windows 7 USB/DVD Download Tool
- seven.3 Bootable USB will not boot
viii More Information
- 8.1 Support Links
- 8.2 Applicative Systems

Prerequisites

Before you start creating a bootable USB flash drive to install Windows (XP, Vista, 7, 8, 8.one, 10), you need to brand sure that:

The USB drive is empty and properly formatted
The USB bulldoze is bootable
Your BIOS/UEFI is properly configured to boot from the USB wink bulldoze first
Y'all have the ISO image of Windows XP, Vista, vii, viii or viii.ane. If you lot have the original Windows installation disc, yous can use that instead of the ISO image.
Software needed to write the ISO image to the USB bulldoze or alternatives, such as Easy USB Creator ii.0 by NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you want to make bootable should have at least four GB in bachelor size.

BIOS/UEFI configuration

To make sure that your BIOS/UEFI is configured to kicking from a USB drive, follow our Boot from USB drive guide. You need to make certain that:

If a Kicking Device menu doesn't appear on your screen where the USB drive is plugged-in, check the BIOS/UEFI settings. A Boot Device menu can expect like this, depending on your computer model and Windows version:

If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

If you're using a computer with Fast Boot option, brand sure that Fast Boot is disabled.

If your BIOS menu doesn't list a USB item in the BIOS settings, it may mean that it can't boot from a USB drive. You tin try with the USB drive plugged-in and then boot into BIOS directly.

If the item doesn't appear, you need to utilize the original Windows installation CD or DVD to install Windows or access the repair tools.

If you demand to use the repair tools of an original Windows installation CD/DVD, yous tin also use Easy Recovery Essentials (download link) and run Automated Repair to automatically find and set boot errors.

Download Easy Recovery Essentials

ISO prototype

If you don't have the ISO image to create the bootable USB drive, you lot can download an official image from Microsoft's website.

You need to accept the production (or license) primal.

Create a Windows XP bootable USB

Yous can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator can apace catechumen the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows XP to a USB drive using Easy USB Creator two.0, but follow these steps:

Download USB Creator ii.0
Install Easy USB Creator 2.0
Browse the Windows XP ISO Image to load at the ISO File field
Select the destination of your USB Drive at the Destination Bulldoze field
Start

Easy USB Creator ii.0 supports both USB 2.0 and USB 3.0.

It'due south uniform with Windows XP, Windows Vista, Windows seven, Windows viii, Windows 8.1, Windows ten plus the Windows Server editions (2003, 2008, 2012). Yous must accept .NET Framework 2.0 or higher in order to use Easy USB Creator two.0

If you lot take the installation disc (CD)

If yous have the original Microsoft Windows XP Professional installation CD, you tin can employ the CD to create a bootable USB using PE Builder.

It's of import to have the following earlier you start:

The Windows Server 2003 SP1 archive. If not, download from Microsoft now: Microsoft Windows Server 2003 Service Pack one (32 bit)
The PE Builder software (BartPE). If not, download BartPE
The original CD of Windows XP Professional person, not a Windows XP Domicile CD.
A Windows XP Home CD volition not work.

To create the bootable drive with Windows XP, follow these steps:

Boot into the organisation
Download the PE Builder software from http://www.nu2.nu/pebuilder/
Install the PE Architect to C:\. The final path should be C:\PEBuilder to make the next steps easier.

Within the PEBuilder folder, create a new folder named SRSP1. This folder's path should exist C:\PEBuilder\SRSP1.

Download the Windows Server 2003 SP1 archive from http://world wide web.microsoft.com/en-us/download/details.aspx?id=1143…
Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
Open Command Prompt. You can also open information technology by typing cmd in the Run dialog box and pressing Enter later on.
Type the cd command to get to the folder where the MS-WS-SP1.exe file exists:
```
cd c:\downloads
```
Don't type MS-WS-SP1.exe in the path above. Y'all only need to go to the folder where the file exists.

Supersede c:\downloads with the alphabetic character of the drive and the directory where the MS-WP-SP1.exe file exists.
Type MS-WS-SP1.exe -10 to begin the extraction process, printing Enter
Choose to extract the files to the aforementioned folder, due east.thousand. c:\downloads:

PEBuilder: Excerpt Files
In Command Prompt, you now demand to go to the extract binder at the i386 sub-folder.To do so, type the same cd command, if you're still at the c:\downloads folder in Command Prompt and y'all haven't created a new folder for the extracted files:
```
cd i386
```
If you created a new binder for the excerpt files, say Extract, in c:\downloads, update the cd command to go to that folder:
```
cd c:\downloads\Extract
```
So, type cd i386, press Enter
Once within the i386 binder via Control Prompt, blazon:
```
copy setupldr.bin c:\PEBuilder\SRSP1
```
Replace c:\PEBuilder\ with the path where the PE Architect software is installed, if this was inverse in previous steps.
While still in Command Prompt, aggrandize the ramdisk.sys file with this control:
```
expand -r ramdisk.sy_ c:\PEBuilder\SRSP1
```
Supercede c:\PEBuilder\ with the path where the PE Builder software is installed, if this was inverse in previous steps.
Go to My Reckoner
Go to PEBuilder folder
Go to SRSP1 binder
Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys

PEBuilder: Check that you take the files copied
Insert the Windows XP Professional CD in the disk tray
Launch PE Builder
Brand the following changes before you click Build:

BartPE: Configuration for Windows XP USB
- At the Source field, type the letter of the drive for the Windows XP CD, due east.thousand. e:\
- At the Output field, type BartPE
- Exit the Custom field blank
- Media output should be None
Click Build
When the build process is consummate, click Close
Become to Command Prompt and and so go to the PEBuilder folder past typing the cd control:
```
cd c:\PEBuilder
```
Type this command (make sure the USB wink drive is not removed) and press Enter:
```
pe2usb -f d:
```
Replace d: with the letter of the alphabet of the bulldoze where your USB flash drive is loaded.
Type YES, when prompted to begin the process. Press Enter after typing Yes.
Press any key to get out the pe2usb procedure, after the process is complete
Safely remove the USB flash drive from the port
Remove the Windows XP CD from the disk endeavor
Reboot the arrangement to cheque if the USB flash bulldoze is now bootable with Windows XP Professional person

If your reckoner doesn't boot into the USB drive direct, go to Prerequisites > BIOS/UEFI configuration or read the Boot from USB drive guide to configure your BIOS menu to boot from a USB device first.

Create a Windows Vista bootable USB

Depending if you accept the ISO paradigm of Windows Vista or the original DVD, you can use Like shooting fish in a barrel USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Like shooting fish in a barrel USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Easy USB Creator 2.0

To burn Windows Vista to a USB drive using Easy USB Creator two.0, just follow these steps:

Download USB Creator 2.0
Install Easy USB Creator 2.0
Browse the Windows Vista ISO Prototype to load at the ISO File field
Select the destination of your USB Drive at the Destination Drive field
Start

Easy USB Creator two.0 supports both USB ii.0 and USB three.0.

Information technology's uniform with Windows XP, Windows Vista, Windows 7, Windows eight, Windows eight.one, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .Internet Framework ii.0 or higher in lodge to use Piece of cake USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

While the name is "Windows seven", you lot can use the tool for Windows Vista systems too.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating arrangement from that USB drive, follow the steps.

You'll exist using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You'll copy the files from the installation disc (DVD) to the USB drive later the diskpart utility process is finished.

The instructions are:

Boot your computer
Open Control Prompt and run it as Administrator.You lot can go at Start > All Programs Accessories > Command Prompt or type cmd in the search field.To run Control Prompt as Administrator, right-click on the Command Prompt particular and select Run as Administrator.
When Command Prompt opens, type this command and press Enter:
```
cd c:\windows\system32
```
Replace c:\ with the letter of the commuter where your Windows Vista is installed: C:\, D:\ etc.
Insert the USB flash bulldoze in the USB port
Blazon:
```
diskpart
```
Press Enter
Type:
```
list disk
```
Press Enter
After you printing Enter for the list disk command, Control Prompt will listing the drives that are connected to your estimator. Observe the USB drive and its corresponding number.

Command Prompt: listing deejay
Then, blazon this command:
```
select disk X
```
Where Ten is the number of the USB flash bulldoze listed by Command Prompt.

The confirmation message should be:
```
Disk i is now the selected disk.
```
Press Enter
Type clean and press Enter
Type create partitioning primary and press Enter
Type select partition i and press Enter
Type active and press Enter
Type this control and printing Enter afterwards:
```
format fs=ntfs
```
It may take a few minutes to format the unabridged USB flash drive, depending on its size. However, you tin can use the quick parameter to format the drive more quickly:
```
format fs=ntfs quick
```
Type assign, press Enter
Type exit, printing Enter
Insert the Windows Vista DVD in the optical bulldoze
Go to My Computer
Notation the alphabetic character of the drive where the Windows Vista DVD is loaded, e.m. D:\, E:\
Go back to Command Prompt and check if the USB flash drive has been formatted
When the format process is complete, type this command and press Enter:
```
d: cd boot
```
Replace D: with the letter of the drive where the Windows Vista DVD is loaded
Then type cd boot and press Enter
Type this command and printing Enter:
```
bootsect.exe /nt60 f:
```
Where f: is the letter of the drive where your USB flash drive is loaded
Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the drive and click Open.

If you followed the above instructions correctly, the USB wink drive should at present be bootable with Windows Vista.

You can bank check this by plugging the USB and rebooting the organization. To brand sure that your estimator boots from a USB drive kickoff, and not from the hard disk drive, go to BIOS/UEFI configuration.

Create a Windows seven bootable USB

You tin can create the bootable USB bulldoze with Windows seven, if:

you accept the ISO image of Windows 7
or you accept the original installation DVD of Windows 7

If you have the ISO image

Using Like shooting fish in a barrel USB Creator 2.0

Easy USB Creator tin rapidly convert the ISO images into bootable USB drives, with just a single click:

Easy USB Creator 2.0 screenshot

Download Piece of cake USB Creator 2.0

To burn Windows 7 to a USB bulldoze using Piece of cake USB Creator 2.0, simply follow these steps:

Download USB Creator 2.0
Install Piece of cake USB Creator 2.0
Browse the Windows 7 ISO Image to load at the ISO File field
Select the destination of your USB Bulldoze at the Destination Drive field
Start

Easy USB Creator 2.0 supports both USB two.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows vii, Windows 8, Windows viii.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). Y'all must accept .Cyberspace Framework 2.0 or higher in order to use Easy USB Creator 2.0

Using Windows vii USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is bachelor to download and you tin can use it to create a bootable ISO image from the ISO epitome y'all purchased and downloaded from Microsoft.

Before you lot continue with these instructions, please make certain that:

You accept the Windows 7 USB/DVD Download Tool downloaded. If not, download Windows vii USB/DVD Download Tool now.
You lot have the Windows 7 ISO Image ready

The instructions are:

Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
At the Source File field, click Browse and discover the Windows vii ISO image on your computer and load information technology

Windows 7 USB/DVD Download Tool: Source File
Click Side by side
Select USB Device
Select the USB flash drive from the drop downward menu
Click Begin copying
Go out the application, when the process is complete

If yous have the installation disc (DVD)

You can use a USB flash drive (see Prerequisites for more data) to install Windows 7 from.

To practice so, y'all need to make the USB flash bulldoze bootable first and and so use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB bulldoze.

The diskpart utility, function of Windows 7, will be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If you accept an installation disc):

First the figurer
Open up Command Prompt as Administrator. Get at Commencement > All Programs Accessories > correct-click on the Control Prompt item and select Run as Administrator.
Enter the password for the Administrator account
At Command Prompt, blazon:
```
cd c:\windows\system32
```
Replace c:\ with the letter of the commuter where your Windows 7 is installed: C:\, D:\ etc.
Press Enter
Insert the USB bulldoze that you want to make bootable in an bachelor port
Type diskpart and press Enter
Type list deejay and press Enter

Command Prompt: list disk
Find the USB drive and its corresponding number in the list provided by Command Prompt
Type this command and press Enter:
```
select disk X
```
Where X is the number of the USB drive listed past Control Prompt above.

The confirmation message should be:
```
Disk 1 is at present the selected disk.
```
Type clean, press Enter
Type create partition master, press Enter
Type select partition 1, printing Enter
Type active, printing Enter
Type format fs=ntfs and press Enter.

Yous tin use the quick parameter to format the drive more chop-chop: format fs=ntfs quick

Insert the Windows 7 DVD and go to My Computer. Notation the letter of the bulldoze where the DVD is loaded, e.g. D:\, E:\
Type assign, press Enter
Blazon get out, printing Enter
After the format process is complete, type this command in Command Prompt and press Enter:
```
d: cd boot
```
Where d: with the letter of the bulldoze where the Windows 7 DVD is loaded.
Type cd kicking, press Enter
Type this command and press Enter:
```
bootsect.exe /nt60 f:
```
Where f: is the letter of the drive where the USB flash drive is loaded
Open up the contents of the Windows seven DVD: right-click on the drive and click Open
Copy all files from the DVD to the USB

Create a Windows 8 / viii.1 bootable USB

Depending if yous accept the ISO image of Windows Vista or the original DVD, you can utilise Easy USB Creator 2.0 to create the USB if you have the ISO paradigm or the diskpart utility to create the bootable USB, if you accept the DVD.